CAS Number
91770-57-9
Name
Residual oils (petroleum), catalytic dewaxed
SIN Groups
Petroleum
Reason for inclusion on the SIN List
Classified CMR according to Annex VI of Regulation 1272/2008. (Might not apply when contaminants are below below legal thresholds and/or full refining history is known) Date for inclusion on the SIN List
2013 February
Hazard class and category code(s)
Source: ECHA Carc. 1B Chemical informationEC number
294-843-3
Hazard statement code(s)
Source: ECHA H350
Registered use(s) - Sector End Use (SU)
Source: ECHA SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys) SU 11: Manufacture of rubber products SU 8: Manufacture of bulk, large scale chemicals (including petroleum products) SU 9: Manufacture of fine chemicals
Registered use(s) - Chemical Product category (PC)
Source: ECHA PC 12: Fertilisers PC 13: Fuels PC 15: Non-metal-surface treatment products PC 16: Heat transfer fluids PC 17: Hydraulic fluids PC 18: Ink and toners PC 19: Intermediate PC 1: Adhesives, sealants PC 23: Leather tanning, dye, finishing, impregnation and care products PC 24: Lubricants, greases, release products PC 27: Plant protection products PC 31: Polishes and wax blends PC 34: Textile dyes, finishing and impregnating products including bleaches and other processing aids PC 35: Washing and cleaning products (including solvent based products) PC 38: Welding and soldering products (with flux coatings or flux cores.), flux products PC 3: Air care products PC 4: Anti-freeze and de-icing products PC 9a: Coatings and paints, thinners, paint removes PC 9b: Fillers, putties, plasters, modelling clay PC 9c: Finger paints
Registered use(s) - Environmental Release Category (ERC)
Source: ECHA ERC 7: Industrial use of substances in closed systems ERC 1: Manufacture of substances ERC 2: Formulation of preparations ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles ERC 5: Industrial use resulting in inclusion into or onto a matrix ERC 6a: Industrial use resulting in manufacture of another substance (use of intermediates) ERC 6b: Industrial use of reactive processing aids ERC 6c: Industrial use of monomers for manufacture of thermoplastics ERC 6d: Industrial use of process regulators for polymerisation processes in production of resins, rubbers, polymers ERC 8a: Wide dispersive indoor use of processing aids in open systems ERC 8d: Wide dispersive outdoor use of processing aids in open systems ERC 8e: Wide dispersive outdoor use of reactive substances in open systems ERC 8f: Wide dispersive outdoor use resulting in inclusion into or onto a matrix ERC 9a: Wide dispersive indoor use of substances in closed systems ERC 9b: Wide dispersive outdoor use of substances in closed systems
Registered use(s) - Process Category (PROC)
Source: ECHA PROC 10: Roller application or brushing PROC 11: Non industrial spraying PROC 13: Treatment of articles by dipping and pouring PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation PROC 15: Use as laboratory reagent PROC 16: Using material as fuel sources, limited exposure to unburned product to be expected PROC 17: Lubrication at high energy conditions and in partly open process PROC 18: Greasing at high energy conditions PROC 19: Hand-mixing with intimate contact and only PPE available. PROC 1: Use in closed process, no likelihood of exposure PROC 20: Heat and pressure transfer fluids in dispersive, professional use but closed systems PROC 21: Low energy manipulation of substances bound in materials and/or articles PROC 2: Use in closed, continuous process with occasional controlled exposure PROC 3: Use in closed batch process (synthesis or formulation) PROC 4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC 5: Mixing or blending in batch processes for formulation of preparations and articles (multistage and/or significant contact) PROC 6: Calendering operations PROC 7: Industrial spraying PROC 8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities PROC 8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities PROC 9: Transfer of substance or preparation into small containers (dedicated filling line, including weighing) |