Lubricating oils (petroleum), C>25, solvent-extd., deasphalted, dewaxed, hydrogenated

CAS Number
101316-69-2
Name
Lubricating oils (petroleum), C>25, solvent-extd., deasphalted, dewaxed, hydrogenated
SIN Groups
Petroleum
Reason for inclusion on the SIN List
Classified CMR according to Annex VI of Regulation 1272/2008. (Might not apply when contaminants are below below legal thresholds and/or full refining history is known)
Date for inclusion on the SIN List
2013 February
Registration information
Source: ECHA
Full registration
Hazard class and category code(s)
Source: ECHA
Carc. 1B

Chemical information

EC number
309-874-0
Hazard statement code(s)
Source: ECHA
H350
Registered production volume
Source: ECHA
10000 - 100000 tonnes per annum
Registered use(s) - Sector End Use (SU)
Source: ECHA
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
SU 11: Manufacture of rubber products
SU 8: Manufacture of  bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
Registered use(s) - Chemical Product category (PC)
Source: ECHA
PC 12: Fertilisers
PC 13: Fuels
PC 15: Non-metal-surface treatment products
PC 16: Heat transfer fluids
PC 17: Hydraulic fluids
PC 18: Ink and toners
PC 1: Adhesives, sealants
PC 23: Leather tanning, dye, finishing, impregnation and care products
PC 24: Lubricants, greases, release products
PC 27: Plant protection products
PC 31: Polishes and wax blends
PC 34: Textile dyes, finishing and impregnating products
including bleaches and other processing aids
PC 35: Washing and cleaning products (including solvent based products)
PC 38: Welding and soldering products (with flux coatings or flux cores.), flux products
PC 3: Air care products
PC 4: Anti-freeze and de-icing products
PC 9a: Coatings and paints, thinners, paint removes
PC 9b: Fillers, putties, plasters, modelling clay
PC 9c: Finger paints
Registered use(s) - Environmental Release Category (ERC)
Source: ECHA
ERC  7: Industrial use of substances in closed systems
ERC 1: Manufacture of substances
ERC 2: Formulation of preparations
ERC 3: Formulation in materials
ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles
ERC 5: Industrial use resulting in inclusion into or onto a matrix
ERC 6a: Industrial use resulting in manufacture of another substance (use of intermediates)
ERC 6b: Industrial use of reactive processing aids
ERC 6c: Industrial use of monomers for manufacture of thermoplastics
ERC 6d: Industrial use of  process regulators for polymerisation processes in  production of resins, rubbers, polymers
ERC 8a: Wide dispersive indoor use of processing aids in open systems
ERC 8d: Wide dispersive outdoor use of processing aids in open systems
ERC 8e: Wide dispersive outdoor use of reactive substances in open systems
ERC 8f: Wide dispersive outdoor use resulting in inclusion into or onto a matrix
ERC 9a: Wide dispersive indoor use of substances in closed systems
ERC 9b: Wide dispersive outdoor use of substances in closed systems
Registered use(s) - Process Category (PROC)
Source: ECHA
PROC 10: Roller application or brushing
PROC 11: Non industrial spraying
PROC 13: Treatment of articles by dipping and pouring
PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation
PROC 15: Use as laboratory reagent
PROC 16: Using material as fuel sources, limited exposure to unburned product to be expected
PROC 17: Lubrication at high energy conditions and in partly open process
PROC 18: Greasing at high energy conditions
PROC 19: Hand-mixing with intimate contact and only PPE available.
PROC 1: Use in closed process, no likelihood of exposure
PROC 20: Heat and pressure transfer fluids in dispersive, professional use but closed systems
PROC 21: Low energy manipulation of substances bound in materials and/or articles
PROC 2: Use in closed, continuous  process with occasional controlled exposure
PROC 3: Use in closed batch process (synthesis or formulation)
PROC 4: Use in batch and other process (synthesis) where opportunity for exposure arises
PROC 5: Mixing or blending in batch processes for formulation of preparations and articles (multistage and/or significant contact)
PROC 6: Calendering operations
PROC 7: Industrial spraying
PROC 8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities
PROC 8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities
PROC 9: Transfer of substance or preparation into small containers (dedicated filling line, including weighing)

Producers

Company Group
Company Name
Grupa Lotos

GRUPA LOTOS S.A., ul. Elblaska 135, 80-718, Gda?sk pomorskie, Poland

MOL Group

MOL Hungarian Oil and Gas Public Limited Company, Oktober huszonharmadika 18,1117, Budapest, Hungary

Service Provider

REACHLaw Ltd., Vänrikinkuja 3 JK 21 , FI-02600, Espoo, Finland

Source: ECHA